 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Ordering number: EN5839 Monolithic Linear IC L88M00T Series 3.3 to 12 V, 0.5 A Low Dropout Voltage Regulator Overview The L88M00T Series are low dropout voltage regulator ICs with output current of 0.5 A. Because they can operate with a low input-output voltage difference, they contribute to smaller and more efficient set power supplies, and are optimum for audio-visual and office automation equipment. Package Dimensions unit : mm 3103-TP-3H [L88M00T Series] Functions and Features . Output voltage L88M33T: 3.3 V L88M05T: 5 V L88M09T: . 500 mA output current 9 V L88M12T: 12 V . Low minimum input-output voltage differential (0.4 V typ) energy and size. . enables to save miniaturizedminiaturize transformerpower Set size can be with compact TP-3H . package.mounting on board permits allowable power Surface to be . dissipationmount raised. with range of formed products. Enhanced flexibility Specifications Maximum Ratings at Ta = 25C (common to L88M00T series) Parameter Input voltage Allowable power dissipation Thermal resistance (junction-atmosphere) Thermal resistance (junction-to-case) Operating temperature Storage temperature Symbol VIN max Pd max j-a j-c Topr Tstg Ta % 25C, no heat sink Tc = 25C, with infinite heat sink Conditions Ratings SANYO : TP-3H Unit V W W C/W C/W C C 1 18 6.25 125 20 -20 to +85 -55 to +150 Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Bussiness Headquarters TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN D3098HA(II) No.5839-1/8 L88M00T Series Pin Assignment Top view [L88M33T] Operating Conditions at Ta = 25 C Parameter Input voltage Output current Symbol VIN lOUT Conditions Ratings 4 to 17 0 to 500 Unit V mA Operating Characteristics at Tj = 25 C, VIN = 6.3 V, IO = 500 mA, COUT = 100 F, CIN = 1 F, see specified Test Circuit. Parameter Output voltage Dropout voltage Line regulation Load regulation Peak output current Output short-circuit current Quiescent current Output noise voltage Temperature coefficient of output voltage Ripple rejection Symbol VOUT VDROP1 VDROP2 VOLN VOLD lOP lOSC IQ1 IQ2 VNO VOUT/Tj Rrej Conditions min 3.2 typ 3.3 0.4 0.2 10 24 900 100 1.9 24 30 0.4 65 max 3.4 0.6 0.3 50 80 300 5.0 50 Unit V V V mV mV mA mA mA mA Vrms mV/C dB lO = 150 mA 4 V % VIN % 17 V 5 mA % IOUT % 500 mA 600 IOUT = 0 10 Hz % f % 100 kHz Tj = 25 to 125 C f = 120 Hz, 4.3 V % VIN % 17 V [L88M05T] Operating Conditions at Ta = 25 C Parameter Input voltage Output current Symbol VIN lOUT Conditions Ratings 5.8 to 17 0 to 500 Unit V mA Operating Characteristics at Tj = 25 C, VIN = 8 V, IO = 500 mA, COUT = 100 F, CIN = 1 F, see specified Test Circuit. Parameter Output voltage Dropout voltage Line regulation Load regulation Peak output current Output short-circuit current Quiescent current Output noise voltage Temperature coefficient of output voltage Ripple rejection Symbol VOUT VDROP1 VDROP2 VOLN VOLD lOP lOSC IQ1 IQ2 VNO VOUT/Tj Rrej Conditions min 4.85 typ 5.0 0.4 0.2 10 30 900 100 2.0 24 40 0.5 65 max 5.15 0.6 0.3 50 100 300 5.0 50 Unit V V V mV mV mA mA mA mA Vrms mV/C dB lO = 150 mA 5.8 V % VIN % 17 V 5 mA % IOUT % 500 mA 600 IOUT = 0 10 Hz % f % 100 kHz Tj = 25 to 125 C f = 120 Hz, 6 V % VIN % 17 V No.5839-2/8 L88M00T Series [L88M09T] Operating Conditions at Ta = 25 C Parameter Input voltage Output current Symbol VIN lOUT Conditions Ratings 9.9 to 17 0 to 500 Unit V mA Operating Characteristics at Tj = 25 C, VIN = 12 V, IO = 500 mA, COUT = 100 F, CIN = 1 F, see specified Test Circuit. Parameter Output voltage Dropout voltage Line regulation Load regulation Peak output current Output short-circuit current Quiescent current Output noise voltage Temperature coefficient of output voltage Ripple rejection Symbol VOUT VDROP1 VDROP2 VOLN VOLD lOP lOSC IQ1 IQ2 VNO VOUT/Tj Rrej Conditions min 8.73 typ 9.0 0.4 0.2 10 54 900 100 2.3 24 40 0.9 59 max 9.27 0.6 0.3 50 180 300 5.0 50 Unit V V V mV mV mA mA mA mA Vrms mV/C dB lO = 150 mA 9.9 V % VIN % 17 V 5 mA % IOUT % 500 mA 600 IOUT = 0 10 Hz % f % 100 kHz Tj =25 to 125 C f = 120 Hz, 10 V % VIN % 17 V [L88M12T] Operating Conditions at Ta = 25 C Parameter Input voltage Output current Symbol VIN lOUT Conditions Ratings 13 to 17 0 to 500 Unit V mA Operating Characteristics at Tj = 25 C, VIN = 15 V, IO = 500 mA, COUT = 100 F, CIN = 1 F, see specified Test Circuit. Parameter Output voltage Dropout voltage Line regulation Load regulation Peak output current Output short-circuit current Quiescent current Output noise voltage Temperature coefficient of output voltage Ripple rejection Symbol VOUT VDROP1 VDROP2 VOLN VOLD lOP lOSC IQ1 IQ2 VNO VOUT/Tj Rrej Conditions min 11.64 typ 12.0 0.4 0.2 10 70 900 100 2.6 24 40 1.2 58 max 12.36 0.6 0.3 50 240 300 5.0 50 Unit V V V mV mV mA mA mA mA Vrms mV/C dB lO = 150 mA 13 V % VIN % 17 V 5 mA % IOUT % 500 mA 600 IOUT = 0 10 Hz % f % 100 kHz Tj = 25 to 125 C f = 120 Hz, 13 V % VIN % 17 V No.5839-3/8 L88M00T Series Equivalent Circuit Block Diagram (Common to L88M00T Series) Reference voltage Start-up circuit Error amp Short circuit protector Thermal protector Test Circuit (Common to L88M00T Series) L88M00T Notes: 1. To ensure operational stability, CIN and COUT should be placed as close to the IC as possible. 2. Because the output capacitor COUT is set at over 100 F to prevent oscillation at low temperatures, a capacitor that exhibits little change in capacity with temperature variations should be used (such as a tantalum capacitor). 3. When VIN is minus (-) and GND is plus (+) (reversed connection), excessive current flow will occur. No.5839-4/8 L88M00T Series Pd max - Ta Common for L88M00T Series With infinite heat sink Allowable power dissipation, Pd max - W Mounted on copper-clad area of 2,000 mm2 Mounted on copper-clad area 740 mm2 Mounted on copper-clad area 180 mm2 Mounted on copper-clad area 36 mm2 No heat sink Ambient temperature, Ta - C 1) The allowable power dissipation is 1.0 W (Ta = 25C) with no fin attached, but when mounted on a hybrid IC board or printed circuit board, high allowable power dissipation is achieved, despite the compact package. The graph below depicts the relationship between the copper-clad area and allowable power dissipation when mounted on a glass epoxy board (50 x 5 0 x 0.8 tmm3) with a copper thickness of 18 m. Pd max - S Allowable power dissipation, Pd max - W Common for L88M00T series PCB Copper-clad area, S - (mm2) Copper-clad area, S - mm2 2) Pd is the value for when the solder on the surface of the IC heat sink has melted completely and the surface mount is horizontal. 3) Please be advised that the flow solder application system (full-heat method) cannot be recommended. Lead Formings LR forming FA forming No.5839-5/8 L88M00T Series VO - VIN VO - VIN Output voltage, VO - V Input voltage, VIN - V VO - VIN Dropout voltage, VDROP - V Output voltage, VO - V Input voltage, VIN - V VDROP - IO Common for L88M00T Series Output voltage, VO - V Input voltage, VIN - V VO - IO Output current, IO - A VO - IO Output voltage, VO - V Output current, IO - A VO - IO Quiescent current, IQ - mA Output voltage, VO - V Output current, IO - A IQ - VIN Output voltage, VO - V Output current, IO - A Input voltage, VIN - V No.5839-6/8 L88M00T Series IQ - VIN Quiescent current, IQ - mA IQ - VIN Quiescent current, IQ - mA Input voltage, VIN - V IQ - IO Input voltage, VIN - V VO - Ta Quiescent current, IQ - mA Output voltage, VO - V Output current, IO - A VO - Ta Ambient temperature, Ta - C IQ - Ta Quiescent current, IQ - mA Output voltage, VO - V Ambient temperature, Ta - C IOP, IOSC - Ta Peak output current, IOP - A Output short-circuit current, IOSC - A Ambient temperature, Ta - C Rrej - f Common for L88M00T Series Ripple rejection, Rrej - dB Ambient temperature, Ta - C Frequency, f - Hz No.5839-7/8 L88M00T Series Rrej - f Ripple rejection, Rrej - dB Frequency, f - Hz Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of December, 1998. Specifications and information herein are subject to change without notice. PS No.5839-8/8 |
Price & Availability of L88M00TSERIES
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |